Solar panel machines

Laying up machine

INQUIRY

Use whole servo closed loop control

Adopt vacuum check technology

Servo lateral locating,digital locating.Set location distance just on the upper computer,be capable of setting every lateral locating distance separately,high efficient in servo location.

Spinning part adopts electronic control and cooperates with robot joint reducer(back interval less than 1arc.min).Be capable of setting spinning degree randomly(set by upper computer) and setting each string’s spinning angle separately.

Glass location device is hand wheel type and intensifying type.The time to change glass is short and no need to use other tools like wrench.

6 opening system and reserving about 30 percent hardware interfaces,which is convenient to the interface control of equipment and auxiliary devices.

ITEM	Specification
Working voltage	AC380V,3 Phase 5 Lines,50Hz
Rated power	7KW
Working air pressure	0.5-0.8Mpa
Average Air Consumption	≧600L/min
Driving mode	Servo driving
Positional accuracy of cell strings	±0.3mm
Tact	60s
Interval of cell strings	1~10mm(adjustable)
QTY of cell strings	4~12strings(adjustable)
Switching time	≦15min
Breakage rate	≦0.3%
Cell main grid line number	2-5grids,switching time≦30min
Applicable Module Size	L(1600-2300mm)W(8001200mm)
Material of transmission belt and sucker	PU
Overall Dimensions	2470mm4180mm2800mm(LWH)
Total weight	About 2500kg
Control system	Screen(MCGS),Chinese/English mode,supporting remote maintenance,and connection to local production-management software.
Operating mode	Manual/Automatic
Equipment Function:Cell strings laying up machine,working with Stringer by 1 VS 1,or 1 VS 2. Cell strings are in parallel with the long side of the modules after conveyed in the Automatic Layup Machine,and adjusted mechanically and by CCD.