Solar panel bussing machine DH150A
The Solar panel bussing machine DH150A is intended for a specific step in solar module manufacturing.
The introduction is meant to describe the machine's real job first, then connect that job to the few parameters that actually affect process choice, capacity matching, and installation planning.
Features
Why choose this solar panel bussing machine?
Clear Job In The Line
The machine should earn attention because its task in production is clear, not because the page repeats technical wording.
Practical Production Value
Buyers usually care most about whether this station removes confusion, variability, or extra labor from the workflow around it.
Application Scenarios
- Solar module production.
- Line integration planning.
- Factory layout comparison.
- Equipment selection.
Recommended Use Cases / Target Customers
- PV manufacturers.
- Line integrators.
- Technical buyers.
- Production engineers.
Machine video
Watch the solar panel bussing machine in operation
Datasheet
Technical parameters
Main Machine
| Model | DH150A | |
| Dimensions | 3650*1400*1800 mm | |
| Weight | 1300 kg | |
| Cycle time | 25 S | |
| Height of module in & out | 950 +-20 mm | |
| Glass specification | Width 980 - 1100 mm | Length 1630 - 2200 mm |
| Bus bar parameter | Bus bar in roll feeding |
Main Machine
| Thickness bus bar | 0.18 - 0.35 mm | |
| Width | 5 or 6 mm | |
| Roller weight | less than 10 Kg | |
| Power | / 1.5 m 3/min | |
| Utility requirements | 15 KW Average: 7 KW | Compressor air 0.5 - 0.7 MPa |
| Measurement | 3644 x 2285 x 2562 mm | |
| Weight | 3500 Kg |
